LE4
Range 5,000 flashs/minute - Adjustable high brightness - Rechargeable lithium batteries
Perfect stroboscopic vision, every detail under control
The new LE4 Stroboscope is a professional device with an innovative LED technology that offers excellent performance with high reliability, ideal for use in test and processing environments.
Entry level model in the range, essential and practical: flow rate up to 5,000 FPM with adjustment of the flashing frequency using two comfortable and ergonomic potentiometers for quick and precise coarse-grained and fine adjustment. The display is not present, for those applications where it is not necessary to know the blinking frequency but a good lighting combined with high portability.
The light source a LED is highly efficient with uniform blinking, the robust solid-state LED construction without glass or gas eliminates the need to replace the lamp.
The light intensity and the sharpness of the image are adjustable using the Brightness potentiometer, which allows you to set the desired brightness to obtain always the perfect vision at every blink frequency and under every working condition.
Power supply to rechargeable lithium-ion battery for long operating time, while it is always possible to use the device powered at 220Vac using the supplied AC adapter.
The LE4 Stroboscope has reduced size and weight which make it extremely handy and easy to use, the case is made of very sturdy plastic material. Carry bag and charger provided.
.png)
Advantages
New stroboscope with a technology high brightness LED with uniform flashing
Adjusting light intensity and image sharpness
Solid state led light source high efficiency, no need to replace the lamp
Capacity 5,000 flashes/min with internal oscillator flash control - On request it is possible to customize the maximum flow rate
Adjusting the flashing frequency using two potentiometers for precise adjustment Coarse-grained and fine
Power supply to rechargeable lithium-ion battery with long operating time, or by means of a supplied charger connected to the 220Vac network
Small size and weight, handy, robust and reliable, simple to use
Designed and built in Italy
Marking CE and compliance with electrical safety regulations
Made in Italy since 1982
Benefits
Better Brightness Control:
continuous and precise adjustment of the light intensity, which allows greater adaptability to specific needs of use
Energy Efficiency:
longer battery life thanks to low energy consumption, with reduced operating costs and environmental impact
Better Light Quality:
more uniform and stable light, which improves the quality of inspections and measurements
Reduced Maintenance:
The longer lifespan and the robustness of the LEDs drastically reduce the need for maintenance
Wide Range of Blink Frequencies:
LEDs can operate at very high blink frequencies, offering greater flexibility for specific applications
Higher Shock and Vibration Resistance:
being solid state devices, LEDs are very robust and resistant
Lower Heat Emission:
LEDs generate little heat, improving operational safety and reducing the need for cooling systems
Quietness:
The LEDs are totally silent and light up instantly, immediately providing full brightness
Technical characteristics
Available with lengths 50/100/150 cm
Applications
The LE4 stroboscope is used to visually analyze any periodic or rotational motion. Among its applications, in the various sectors of industrial production and maintenance and research: observations on printing machines and textiles — vibration control — quality control — etc.
The importance of predictive maintenance
For every production reality, predictive maintenance is of fundamental importance to increase production efficiency, reduce machine downtime, contain operating costs and improve quality and profitability.
BINT LED Stroboscopes are the ideal tools for preventing costly problems and ensuring the success of a predictive maintenance program.
You can find more details on the Applications and the Operating Principle of Stroboscopes on the dedicated pages.
Download material
Do you need a replacement probe?
We can provide replacement probes both in case the probe breaks and if the customer wants to have both types of probe (standard and flat).
The probes are interchangeable after recalibrating the instrument, which is carried out using the ST200 Calibration System.
The technical details of the probes and the calibration system are available on the side or by downloading the PDF with the button below.
SM5 - Standard probe
The head of the measuring probe, to allow the most precise possible positioning of the pre-brush spring, is shaped with a 120° wide “V” groove and
central cylindrical recess with diameter 5 mm and depth 1.5 mm, for housing the cylindrical pressure finger of helical spiral pre-brush springs:
- total probe height = 8 mm
- dimensions 16 x 10 x 8 mm
SM5/F - Flat probe
For special applications or for specific customer needs, the probe head is flat, without the “V” slot and the cylindrical recess, the height of the probe is smaller:
- without “V” groove and cylindrical recess
· total probe height = 7 mm
- dimensions 16 x 10 x 7 mm
ST200 - Calibration System
The probes are interchangeable after re-calibrating the instrument, carried out using the optional ST200 Calibration System, which is also used to periodically check the correct calibration of the probe over time.
The ST200 Calibration System is supplied with a sample weight of 2 kg
Kelvin cables
The four-terminal (Kelvin) measurement method uses two leads for current and two for voltage, to eliminate the resistance of the measurement leads and improve accuracy.
There are two different types of Kelvin Leads, the length of the lead can be customized.
KB7 - Kelvin cable
Pair of Kelvin KB7 type measuring cables with crocodile clips with max opening 7mm -
Cable length = 1.60m
KB32 - Kelvin cable
Pair of Kelvin KB32 type measuring cables with crocodile clips with max opening 32mm -
Cable length = 1 m
Related products
Areas of application Stroboscopes
The applications of stroboscopes are many, in the various sectors of industrial production and maintenance, research and teaching: measurement of rotation speed, frequency or period - observations on printing, textile and packaging machines - label control - control of vibrations, mechanical deformations, cable marking, quality control - studies on the cavitation of propeller blades - fluid movement - etc.
Below we go into detail for the most important areas of application of BINT LED stroboscopes.
Areas of application BINTPRES M50
The BINTPRES M50 meter, specialized in measuring the force exerted by pre-brush springs on the brushes of rotating electric machines, plays a crucial role in maintenance and quality control in many industrial sectors. This tool makes it possible to ensure the proper functioning of electrical machines, preventing premature wear and malfunctions.
Below we go into details for the most important fields of application of the BINTPRES M50 meter.
Areas of application Battery Tester BT1
The large scale use of rechargeable batteries makes it necessary to test their efficiency over time: the new BAT TEST BT1 Battery Tester is the ideal tool for immediate and reliable simultaneous measurements of voltage, internal resistance and remaining capacity.
Below we go into detail with an overview of the various sectors of use.
Application areas Microohmeters
BINT Milliohmmeters and Microohmmeters are essential to ensure the quality and reliability of measurements, below we go into detail for the most common sectors of use.
Are you ready to buy?
Our LED Stroboscopes give you concrete help in controlling production, saving you time and optimizing waste for non-compliant material.
Perfect stroboscopic vision, every detail under control.
Ask for a quote, we are available to recommend the model that best suits your needs.
Do you have a stroboscope to fix?
We offer an accurate repair service: once the device has been examined in our laboratory, we provide a detailed quote for its repair. Write to info@bint.it