BATTERY TESTER BT1
Measure Voltage — Internal Resistance — Residual Capacity
Ideal for measurements on any type of battery up to 60V — 20A/h
** Not representative for measurements on lithium batteries **
The new BAT TEST BT1 It is an innovatively designed instrument for battery status testing, suitable for verifying the efficiency of commonly used rechargeable batteries: its ease of use, reading accuracy, immediate response and protection against operating errors make it the ideal tool for operational use in the field, in industrial sectors, in maintenance, in the laboratory.
It allows the simultaneous measurement of Voltage V - Internal Resistance mΩ - Remaining Capacity/h (only for lead acid batteries).
Measures batteries from 1.2 Vdc up to 60 Vdc, from < 0.25 A/h to >20 A/h:
- Pb lead
- NiCd nickel cadmium
- NiNH nickel metal hydrate
- All battery: all other types of batteries (lithium, alkaline, carbon, etc.)
The measurement is displayed using a 16x2 dot matrix LCD display, with simultaneous indication of the voltage V, the internal resistance mΩ and the Remaining Capacity A/h (only for lead acid batteries), for a reliable, simple and immediate reading of the state of the battery under test.
Ideal for measurements on all types of batteries in security and fire protection systems, telecommunications, emergency lights, UPS systems, portable instrumentation, electric vehicles and in any sector where rechargeable batteries are used.
The instrument is powered by AA alkaline or rechargeable batteries, with a long operating range. It is also possible to power the appliance with an optional external power supply.
The device is equipped with internal protection against measuring a battery with a voltage that is too high (above 50 Vdc) and against temporary overheating due to excessively intensive or erroneous use, against polarity reversal.
Survey of the measurement of the dynamic resistance of the 4-wire battery, with an impulsive method with high immunity to any network disturbances, both at 50 Hz and at 60 Hz.
The instrument is supplied complete with Kelvin type measuring cables: in these cables, two clamps are used for measuring voltage and two other clamps for measuring current. The separation of the two pairs allows obtaining more accurate measurements than the normal two-terminal technique, allowing the cable impedance to be eliminated from the measurement.
Two different models of Kelvin cables are available for every customer need (to be specified in the order):
KB7: Pair of Kelvin wires - cable L=1.60mt - pliers with max opening 7mm
KB32: Pair of Kelvin wires - cable L=1,00mt - pliers with max opening 32mm
The equipment includes the carrying case and the user manual.
** Not representative for measurements on lithium batteries **
.png)
Advantages
Microprocessor device suitable for the immediate and reliable verification of the condition of rechargeable batteries, to test their efficiency
Allows simultaneous measurement of Voltage V - Internal Resistance mW - Residual Capacity A/h (only for lead acid batteries)
Measures batteries from 1.2 Vdc up to 60 Vdc, from < 0.25 A/h to >20 A/h
** Not representative for measurements on lithium batteries **
Measurement of the dynamic resistance measurement of the 4-wire battery, with an impulsive method
Large two-line dot matrix LCD display for perfect readability
Portable instrument of small size and weight, simple to use, handy, sturdy
Complete supply of kelvin measurement cables
CE marking and compliance with electrical safety regulations
Benefits
Accurate and Reliable Measurements
Thanks to the four-terminal Kelvin measurement technology, the BT1 provides precise measurements of the voltage, internal resistance and remaining battery capacity, allowing accurate data to be obtained for a reliable diagnosis.
Versatility of Application
The BT1 is compatible with a wide range of batteries, including lead, nickel-cadmium, nickel-metal hydrate and other types of rechargeable batteries. This makes it ideal for multiple industrial sectors, from telecommunications to electric mobility.
Ease of Use
The simple and intuitive interface with 16x2 LCD display allows immediate reading of data, facilitating use even by inexperienced operators.
Preventive and Predictive Maintenance
It allows you to monitor the status of the batteries without having to disconnect them from the system, facilitating preventive and predictive maintenance. This helps prevent sudden failures and maintain operational efficiency.
Portability and Robustness
With compact dimensions and low weight, the BT1 is easily transportable and can be used in different work environments. Its sturdy construction ensures long life even in difficult conditions.
Protection and Security
Equipped with internal protections against reverse polarity and measurements on batteries with too high voltages, the BT1 ensures safe use without risk of damage to the instrument or batteries tested.
Flexible Feeding
Powered by AA alkaline or rechargeable batteries with a long battery life, the BT1 can also be powered through an optional external power supply, ensuring prolonged operational continuity.
Energy Efficiency
The possibility of taking measurements without disconnecting the batteries from the charging circuit reduces the time and effort required for tests, increasing the efficiency of maintenance processes.
After-Sales Assistance
Designed and built in Italy, the BT1 comes with a quick and efficient after-sales service, ensuring technical support and maintenance when necessary.
Technical characteristics
Available with lengths 50/100/150 cm
Applications
Electric Mobility
Battery manufacturers
IT and Telecommunications
Logistics and Warehousing
Security and Protection
Industrial Production
Industrial Maintenance
Research and Development
Renewable Energies
Transportation and Logistics
Download material
Do you need a replacement probe?
We can provide replacement probes both in case the probe breaks and if the customer wants to have both types of probe (standard and flat).
The probes are interchangeable after recalibrating the instrument, which is carried out using the ST200 Calibration System.
The technical details of the probes and the calibration system are available on the side or by downloading the PDF with the button below.
SM5 - Standard probe
The head of the measuring probe, to allow the most precise possible positioning of the pre-brush spring, is shaped with a 120° wide “V” groove and
central cylindrical recess with diameter 5 mm and depth 1.5 mm, for housing the cylindrical pressure finger of helical spiral pre-brush springs:
- total probe height = 8 mm
- dimensions 16 x 10 x 8 mm
SM5/F - Flat probe
For special applications or for specific customer needs, the probe head is flat, without the “V” slot and the cylindrical recess, the height of the probe is smaller:
- without “V” groove and cylindrical recess
· total probe height = 7 mm
- dimensions 16 x 10 x 7 mm
ST200 - Calibration System
The probes are interchangeable after re-calibrating the instrument, carried out using the optional ST200 Calibration System, which is also used to periodically check the correct calibration of the probe over time.
The ST200 Calibration System is supplied with a sample weight of 2 kg
Kelvin cables
The four-terminal (Kelvin) measurement method uses two leads for current and two for voltage, to eliminate the resistance of the measurement leads and improve accuracy.
There are two different types of Kelvin Leads, the length of the lead can be customized.
KB7 - Kelvin cable
Pair of Kelvin KB7 type measuring cables with crocodile clips with max opening 7mm -
Cable length = 1.60m
KB32 - Kelvin cable
Pair of Kelvin KB32 type measuring cables with crocodile clips with max opening 32mm -
Cable length = 1 m
Related products
Areas of application Stroboscopes
The applications of stroboscopes are many, in the various sectors of industrial production and maintenance, research and teaching: measurement of rotation speed, frequency or period - observations on printing, textile and packaging machines - label control - control of vibrations, mechanical deformations, cable marking, quality control - studies on the cavitation of propeller blades - fluid movement - etc.
Below we go into detail for the most important areas of application of BINT LED stroboscopes.
Areas of application BINTPRES M50
The BINTPRES M50 meter, specialized in measuring the force exerted by pre-brush springs on the brushes of rotating electric machines, plays a crucial role in maintenance and quality control in many industrial sectors. This tool makes it possible to ensure the proper functioning of electrical machines, preventing premature wear and malfunctions.
Below we go into details for the most important fields of application of the BINTPRES M50 meter.
Areas of application Battery Tester BT1
The large scale use of rechargeable batteries makes it necessary to test their efficiency over time: the new BAT TEST BT1 Battery Tester is the ideal tool for immediate and reliable simultaneous measurements of voltage, internal resistance and remaining capacity.
Below we go into detail with an overview of the various sectors of use.
Application areas Microohmeters
BINT Milliohmmeters and Microohmmeters are essential to ensure the quality and reliability of measurements, below we go into detail for the most common sectors of use.
Are you ready to buy?
Our LED Stroboscopes give you concrete help in controlling production, saving you time and optimizing waste for non-compliant material.
Perfect stroboscopic vision, every detail under control.
Ask for a quote, we are available to recommend the model that best suits your needs.
Do you have a stroboscope to fix?
We offer an accurate repair service: once the device has been examined in our laboratory, we provide a detailed quote for its repair. Write to info@bint.it